Cliffside's Criss-Cross suite displayed in the Iron finish

Our new board design incorporates the traditional 3″cc cabinet pull, the matching 8″cc and 12″cc appliance pulls, and the brand-new 5″cc large cabinet pull! All of the new 5″cc pulls will be available in fall 2011, but these boards give you an exclusive sneak peek at the designs of these pieces, which will be available in ten finishes and in all five solid brass hardware suites.

At right, you can see the Criss-Cross suite, bold and distinctive in the Iron finish. Along the top of the board are the four pull sizes: 3″cc at the far left, the new 5″cc size beside it, and then the 8″cc small appliance pull and the 12″cc refrigerator pull at the far right. Below the pulls on the left, you can see the K579 knob, a Cliffside-exclusive design, and the K580, a more ornate selection. Any iron-finish solid brass knob can coordinate with this suite, like the oblong 105 shown beneath the 5″cc pull.

In the lower center section of the board, you can see the P398 cup pull, attractively antiqued and displaying the suite’s signature reeded design. Hinges are available to coordinate with all of our suites, and this one is no exception; the AHI inset armoire hinge is displayed alongside two other non-mortise hinges: the BH3A-NM (left center) and BH2A-NM (right center). All of Cliffside’s solid brass suites match our solid brass cupboard latches too, including the IBCL shown here in the lower right corner.

All in all, the new Cliffside display designs are a big hit. The 5″cc pulls are brand-new designs which we believe are the best way to complete our solid-brass suites. For further details on our displays or with any questions, feel free to e-mail us or contact the customer service department

for more information.

BH3A-NM

Quick facts

• Outer leaf length: 2¹/₂“
• Inner leaf length: 1¹/₄“
• Overall length: 3⁷/₁₆“
• Barrel diameter: 6mm

Details

Added to Cliffside’s hinge line due to customer demand, the BH3A-NM is the newest hinge to grace Cliffside’s shelves. With the same attractive finial tip as the standard BH2A-NM, the BH3A-NM is a longer and more graceful version of the same hinge. With a larger amount of material, the BH3A-NM is more durable, designed to hold taller doors where higher strength capacity is a must-have. Of course, the extruded construction common to all Cliffside hinges is also a factor here, as is the painstaking attention of our European hinge craftsmen.

With 11 signature finishes, the BH3A-NM offers a wide selection already, even as a new item. These finishes are designed to coordinate with Cliffside’s solid brass hardware suites, allowing for a unified look throughout any kitchen or bath. The BH3A-NM is an important addition to Cliffside’s non-mortise line because it fills in the space between the non-mortise BH2A-NM and the non-mortise AHI, creating a progression of sizes for inset cabinets that gives a wide range of choice. Simply put, the BH3A-NM is versatile to use and superior in quality.

Cliffside Industries today announced the arrival of its new BH3A-NM hinge line. These new hinges are manufactured and finished by the same companies that make every hinge offering in the hardware line. This new hinge offers a longer barrel (3½”) and leaf (2½”) which is excellent for use in the construction and hanging of larger-sized cabinet doors. Each hinge is fully adjustable and countersunk to meet the exacting standards that Cliffside’s customers demand. In addition, the barrel diameter (¼”) is identical to that of the BH2A-NM hinge, making it seamlessly easy to use both sizes in the same application without fretting over style differences.

“In the same way that our BH3NA hinge offers a bolder alternative for those customer seeking a mortised hinge, the new BH3A-NM offers a larger size for those manufacturers who prefer not to have to mortise their doors,” said one customer service representative.

Cliffside offers eleven standard hinge finishes available to choose from: Antique Brass and Antique English, Black, Iron, Old Antique, Old Copper, Polished Brass, Polished Chrome, Polished Nickel, Silver Satin and Venetian Bronze. These finishes cover the entire hinge line for the BH2A, BH2A-NM, BH2A-NF, BH3NA, and  BH3A-NM styles. For more information on other hinge styles and finishes, visit the Cliffside website by following the links below.

Photo Gallery

Company Information

Cliffside Industries has been designing and distributing high-quality solid brass hinges since 1987 and supplies many of the industry’s most respected cabinet manufacturers. Cliffside’s hinges are high quality solid brass extruded hinges made by European craftsmen who are masters of precision hinge making. We believe that our hinges exemplify the highest quality in the industry.

Further information

Contact Cliffside customer service for more details and ordering information:

• Phone: (800) 873-9258
• Fax: (800) 926-3435
• E-mail: info@cliffsideind.com or blog@cliffsideind.com
• Website: http://www.cliffsideind.com/
• Address: 60 Wright Avenue; Lititz, PA 17543

“Cliffside Industries is an award winning distributor of traditional solid brass hinges, knobs and pulls respected industry-wide for our customer service. Family owned and operated since 1987.”