The Blog Before Christmas 1 comment

‘Twas the night before Christmas, and all through the house
Not a creature was stirring, not even a mouse
The cabinets were hung in the kitchen with care
In hopes that their hardware picks soon would be there.
The homeowners nestled all snug in their beds,
While visions of remodels danced in their heads.
Then down in the house, there arose such a clatter,
They sprang from their beds to see what was the matter.
To the top of the stairs, they flew and they ran—
And saw, stunned and startled, a jolly old man
Clad all in red with a sack full of knobs
Provided for everyone’s hardware jobs!

He reached in the sack and shook it about
Then reached down inside and took hardware out
The pulls and the latches gleamed silver and gold
With dark-colored hinges like antique of old.
Dim light from the window made them sparkle like day,
And the man chuckled loudly as I heard him say:
“Pick Copper! Pick Iron! Pick Black or Venetian!
The hardware you need for your bath and your kitchen!”

He strolled through the house, seeking cupboard and shelf,
Their hardware improved by the jovial elf.
Cried the man of the house, “Sir, is this a joke?—
Why did you adorn all our cabinets of oak
With all of these dazzling hardware delights?”
But St. Nick just winked as he turned to the right
And dashed to the bath, where he drew from his pack,
Crystal knobs with glittering stems at the back.
Attached to the vanity, they sparkled and shone,
With light glist’ning this way and that from the stones.

The owners—they saw all the changes he made;
Fine hardware on all of their cabinets displayed.
They asked him, “O Santa, please, where did you get
All this hardware you’ve placed upon our cabinets?”
St. Nick laughed aloud when he heard their request:
“Why, from Cliffside! For you, none but the best!”

And laying his finger aside of his nose,
And giving a nod, up the chimney he rose;
He sprang to his sleigh, to his team gave a whistle,
And away they all flew like the down of a thistle.
And they heard him exclaim, as he drove out of sight:
“Merry Christmas to all, and to all a good night!”

Happy Holidays to you and yours from Cliffside Industries!
Adapted from “A Visit from St. Nicholas” by Clement Clarke Moore

Featured Suite: Classic No comments yet

hen Cliffside Industries introduced its signature line in the spring of 2009, the Classic Suite required little change. Most of the pieces in this traditional suite have stood the test of time and have been part of our hardware offerings for close to 15 years. Nevertheless, Cliffside has added new pieces in response to customer demand, and we’ll now look at them one by one.

Knobs

161-VB

Many of Cliffside’s customers prefer traditionally-styled hardware, which is why it comprises the majority of our hardware line. The 161 knob is a prime example of a piece whose design is simple yet timelessly elegant. With its attached backplate and beveled face, it is one of Cliffside’s most popular pieces. As with all of the solid brass hardware suites, this piece is available in 10 finishes. It is just under 1¼” in diameter and is 1⅛” in height.

158-FB

The other two knobs in the classic suite — the 158 and the 110 —are also very simple pieces that maintain the ridged element that ties the Classic Suite together. The 158, which is now available in several new finishes as a result of the line expansion, is popular for its rounded face and attached backplate, while the 110 offers a stylistic alternative to the plainness of other Cliffside knobs like the 158 or the 100 series.

Pulls

The classic suite pulls in polished nickel (3"cc, 8"cc, and 12"cc models)

The simple B1 series pulls of the Classic Suite combine smooth lines with ageless style to create this very traditional look suitable for any cabinet application. The 8″cc pulls are now part of this line as well: 10 completely new items! Besides adding the Venetian Bronze finish to the 3″cc line, the 12″cc appliance pulls are now also available in our 10 signature finishes — new finishes include Polished Chrome, Antique Brass, Old Copper, and Black.

K341-OC

The K341 cup pull is a chic alternative to other Cliffside cup pulls. Where the others are crafted in the traditional half-circle shape, the K341 is elongated, echoing the elegant lines of the B1 series. This pull’s new finishes, which include Polished Chrome and Polished Nickel, are already among its most popular sellers.

Accessories

All of the Cliffside hardware suites, including the Classic, can be used in conjunction with any of our matching hinge styles, including the BH2A, BH2A-BALL, BH2A-NF, BH3A, BH2A-NM, and BH2A-NM-BALL.  We also have armoire hinges and offset hinges available in most of our suite finishes. Our stylish solid brass latches (IBCL and SBCL) are the perfect compliment to this suite. Introduced in 2008, the IBCL has quickly become a very popular part of our line, and its lines match well with the bold style of the Classic suite.

The moral?

If you’re in the mood for an upgrade this holiday season, consider adding a touch of class — with Cliffside Industries’ Classic Suite!

Featured Suite: Criss-Cross 1 comment

Cliffside’s criss-cross suite received the largest expansion in the past year. With the addition of several new products and a large jump in the number of available finishes, the criss-cross design has proven to be quite popular. Each piece in the suite is unique, so we’ll take them on one at a time, starting with the pulls.

Pulls

The P-399 pulls in 3"cc, 8"cc, and 12"cc models

Cliffside’s criss-cross pulls are the biggest part of this line, both literally and figuratively. The series was originally only available with the 3″cc size, and only existed in two finishes (Antique Brass and Silver Satin). With the advent of the suite concept at Cliffside, we have expanded the 3″cc to be available in all ten of our best-selling finishes. Additionally, we added the 8″cc and 12″cc sizes, which were developed in conjunction with the engineers that create our products.  Though first attempts proved to be awkwardly shaped and humorous at times, the results were finely crafted pieces of durable and beautiful hardware that look stunning on any cabinet design. These pulls match especially well with the “ribbon and reed”-style molding found on many traditional cabinets.

P-398-OC

Also part of this series of pulls is the P-398 cup pull, which has also been expanded to ten finishes. Originally available in only AB, PB, and SS, this piece is striking in some of our more detailed or antiqued finishes, like Venetian Bronze, Iron, and Old Copper, and offers an alternative to a plain and simple cup pull in the simpler finishes like Flat Black and Old Antique.

Knobs

K-580-OA

The original knob from the criss-cross series is the K-580, which Cliffside has offered in three finishes for years. The line expansion gave this traditional piece a new life by providing it in several dramatic new colors. The knob’s design is tied to this line by the criss-cross style around the exterior rim of the face. It is a subtle way of connecting hardware pieces without being too bold.

K-579-VB

If you’d rather make a bold statement about the criss-cross design, consider the K-579. This piece is completely unique, developed through cooperative efforts between Cliffside representatives and the engineering team. The K-579 was chosen from several different designs, based on customer demand for a knob that more obviously matched the P-399 pulls. Each finish offers a different perspective on the knob, whether you seek a subdued statement or an emphatic one.

Mix and Match

Any knob can be used with this hardware suite, if you’d rather not use the K-580 or K-579. If you’re looking for an oblong-shaped knob, for example, why not try the 105? For a more detailed look, the B721 is available as well.

Accessories

BH2A-AE-NF

The main impact that the criss-cross suite had on the Cliffside hinge line was the addition of the Antique English finish. Since the Antique Brass criss-cross hardware is quite popular, it was mentioned by several customers that Cliffside did not have hinges to match the hardware exactly. As Cliffside’s hinges are European-made, the “AB” finish is a rich, dark brownish-gold, rather than the brighter brushed golden color tones that American designers and manufacturers consider to be antique brass. Thus was born the Antique English finish, a matching brushed brass finish that resembles antique brass hardware more closely. This finish is available in six different hinge styles, including the BH2A, BH2A-BALL, BH2A-NF, BH3A, BH2A-NM, and BH2A-NM-BALL. If you are more interested in an armoire hinge, the Bronze Satin finish is the best match in that series.

SBCL-PN

In the Antique Brass finish, Cliffside also brought back the SBCL-AB, and introduced the IBCL-AB, a dramatic-looking piece. As with the rest of our signature hardware line, both latch styles were extended to ten finishes when we expanded our line, including the popular new SBCL-PN shown at right.

The moral?

If you’re frustrated looking for hardware in a saturated market, don’t get cross… get Cliffside’s Criss-Cross!

Featured Suite: Rope No comments yet

Continuing our featured suite series, we focus next on the second grouping in the 2009 new product supplement: the Rope Suite. When originally introduced, it consisted of just three pieces, and was available only in five finishes. Due to demand, it’s now available in all of our ten signature finishes. Let’s examine its individual elements.

Knobs

B674 knob

B674-31-OC

The B674-31 is one of the three original pieces in this suite. It features the braided rope design around the rim of the knob. With a 1¼” diameter, it is similar in size to many of our other standard round knobs while offering a decorative alternative to more traditional styles. As with all of the hardware suites, this item is solid brass and available in 10 finishes.

B721 knob

B721-VB

In response to customer requests, the original B711 knob has been replaced by the new B721, which was introduced in spring of 2009. This oblong knob has the same look and braided design of the B711; however, it has been enlarged slightly. Where the B711 knob was 1¼” in diameter and 1” in height, the B721 knob is 1½” in diameter with a height of 1¼”.

Other knobs

161-IR

Since all of the pieces in the Cliffside signature line are available in all ten finishes and are all made from the same material, any knob can be used with the Rope Suite, if you prefer not to utilize the above designs. In the new product supplement, the B674 and B721 are accompanied by the 161 knob, but any other knob can also be used.

Pulls

K344 series pulls in 3"cc, 8"cc and 12"cc models

Before our recent line expansion, the K344 series was notably inconsistent, with the 3″cc pull available in the BNI finish while the 12″cc appliance pull was available in SS (Silver Satin). We are pleased to announce that all of the pieces are now available in the SS finish only, allowing you a greater freedom to choose pieces that match your hardware! The newest piece is the K344-8, a stylish size that is appropriate for oversized pantry doors or for appliances like dishwashers and trash compactors with wood panel kits.

K544-AB

This suite is the only one to receive a completely new cup pull as well; it was designed in conjunction with our suppliers especially for Cliffside Industries. Borrowing the braided design of the K344 and following the style of the ever-popular K4235, the new K544 cup makes a bold statement on any drawer.

Accessories

SBCL-PN

Each Cliffside suite can be accompanied by the use of one or more latches. Cliffside offers two styles: the IBCL finger latch, and the SBCL turn latch. Each is cast from solid brass and will prove more durable in the long run than any similar products made of inferior materials. Cliffside also offers the widest variety of finishes in the industry for both of these products.

BH2A-FB-NF

Cliffside’s solid brass hinges are the perfect solution for matching an exposed hinge to your hardware. Made with solid one-piece construction, our hinges have been developed with the finest European craftsmen to bring you a product that remains unchanged over the years and continues to provide the high quality you deserve and expect. Cliffside currently offers six hinge styles, with a new seventh style arriving in early 2010. The BH2A hinge is available with our signature steeple finial (17 finishes), a ball finial (11 finishes), or no finial (11 finishes). Its larger counterpart, the BH3A, is available with its signature minaret finial in 13 finishes. The BH2A-NM non-mortise butt hinge has 16 finishes to choose from with the signature finial, and 11 finishes with a ball tip as well. The newest hinge style, BH3A-NM — a larger non-mortise hinge — will be available with the signature finial in 11 finishes coming in early 2010. Additionally, Cliffside offers two styles of offset hinges and two styles of armoire hinges to supply your cabinet construction needs.

The moral?

Let yourself get roped in to buying Cliffside hardware this winter – you won’t regret it!

Featured suite: Scroll No comments yet

The Scroll Suite is a collection of some of Cliffside’s most popular items. As with all of our solid brass hardware suites, it is made from high-quality material and available in our top ten signature finishes. Let’s examine the individual elements of this suite in closer detail.

Knobs

100 series knobs

100-PB

When Cliffside Industries was founded over 23 years ago, it began with one item: the 100 knob in polished brass. From this one item, Cliffside has expanded to carry a variety of hardware styles, materials, sizes, and suppliers, but the 100 remains our top-selling piece. The standard mushroom-shaped knob has a 1¼” diameter and stands 1⅛” high. Constructed from solid brass, the 100 has a distinctive flat face, unique among many of the other round-faced knobs found in today’s kitchen and bath showrooms.

100-20-SS

100-20 series knobs

The first two item numbers in this suite are similar for a very important reason: the 100-20 is simply the 100 knob’s baby brother. Standing just under ¾” tall and with a ¾” diameter, the 100-20 is perfect for applications requiring a space saver, like a pull-out cutting board, miniature drawer or door, or the front of a jewelry cabinet. It has all of the advantages and style of the 100 in 60% of the space.

105 series knobs

105-VB

Following the same simple styling of the 100 series, the 105 is a oblong shape called by many names (egg, football, etc.). Whatever its moniker, it is still one of Cliffside’s top ten selling products, and has been around almost since the beginning. At 1¼” long and just under ½” wide, the knob is comparable in size to many others in the Cliffside signature line, though it is among the tallest at just under 1½”. The 105 also comes with small brads to aid in installation: when the piece is installed on the cabinet, simply insert the brad into the small hole provided in the back of the stem. The brad will affix the knob to the cabinet in the user’s preferred position (vertical or horizontal) and keep it from rotating if it should become loose.

Pulls

Scroll suite pulls in 3"cc, 8"cc, and 12"cc

All Cliffside hardware suites are defined by their pulls and this one is no exception. The SP series pulls are available in 3 sizes — 3″cc, 8″cc, and 12″cc (all sizes shown). Each one features the same attractive  scrolled design in the middle of the pull. The grip height of the 3″cc model is ¾”, while the 8″cc and 12″cc designs share a 1″ grip height. Each pull is accompanied by decorative escutcheons or backplates, which can be used or discarded at your discretion. All of the pulls in this series are, of course, solid brass, which makes them heavier and more durable than competitors’ zinc, aluminum, or steel products.

K4235-IR

Each hardware suite also features a unique cup pull. For the traditional scroll design, Cliffside chose the half-circle bin pull known as K4235. #5 on our list of top ten-selling items, the K4235 is our top-selling cup and an example of Cliffside’s classic styling. As with the standard pulls and all of Cliffside’s solid brass cups, it measures 3″cc. The K4235 is 3½” in overall length, with a height of 1¾” and a projection of ⅞”.

Accessories

Latches

Each Cliffside suite can be accompanied by the use of one or more latches. Cliffside offers two styles: the IBCL finger latch, and the SBCL turn latch. Each is cast from solid brass and will prove more durable in the long run than any similar products made of inferior materials. Cliffside also offers the widest variety of finishes in the industry for both of these products.

BH2A-AE-BALL

Hinges

Cliffside’s solid brass hinges are the perfect solution for matching an exposed hinge to your hardware. Made with solid one-piece construction, our hinges have been developed with the finest European craftsmen to bring you a product that remains unchanged over the years and continues to provide the high quality you deserve and expect. Cliffside currently offers six hinge styles, with a new seventh style arriving in early 2009. The BH2A hinge is available with our signature steeple finial (17 finishes), a ball finial (11 finishes), or no finial (11 finishes). Its larger counterpart, the BH3A, is available with its signature minaret finial in 13 finishes. The BH2A-NM non-mortise butt hinge has 16 finishes to choose from with the signature finial, and 11 finishes with a ball tip as well. The newest hinge style, BH3A-NM — a larger non-mortise hinge — will be available with the signature finial in 11 finishes coming in early 2010. Additionally, Cliffside offers two styles of offset hinges and two styles of armoire hinges to supply your cabinet construction needs.

The moral?

Remember to contact Cliffside Industries for all of your cabinet hardware needs this holiday season!